 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EC11 Series * RoHS Compliant (Pb-free) * HCMOS/TTL output * 5.0V supply voltage * 14 pin DIP package * Stability to 20ppm * Custom lead length, gull wing options available EC11 H 5.08 W 20.8 L 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current 250.000kHz to 24.000MHz 24.001MHz to 50.000MHz 50.001MHz to 66.667MHz 66.668MHz to 106.250MHz Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Inclusive of Operating Temperature Range, Supply Voltage, and Load w/TTL Load w/HCMOS Load w/TTL Load w/HCMOS Load 0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of Waveform w/HCMOS Load at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load at 1.4VDC w/TTL Load or w/HCMOS Load < 70.000MHz at 50% of Waveform w/TTL Load or w/HCMOS Load > 70.000MHz Load Drive Capability 250.000kHz to 24.000MHz 24.001MHz to 70.000MHz 70.001MHz to 106.250MHz Tri-State Input Voltage VIH :No Connection VIH :2.2VDC VIL :0.8VDC Aging (at 25C) Start Up Time Period Jitter: Absolute Period Jitter: One Sigma 50 10(%) (Standard) 50 5(%) (Optional) 50 5(%) (Optional) 10TTL Load or 50pF HCMOS Load 10TTL Load or 15pF HCMOS Load 10LSTTL Load or 15pF HCMOS Load Enables Output Enables Output Disables Output: High Impedance 5ppm / year Maximum 10mSeconds Maximum 100pSeconds Maximum 25pSeconds Maximum 0.250MHz to 106.250MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 10% 45mA Maximum 55mA Maximum 65mA Maximum 85mA Maximum 100ppm, 50ppm, 25ppm, or 20ppm Max. (0C to 70C Only) 2.4VDC Minimum VDD-0.5VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 6 nSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC11 14 pin DIP 5.0V OS04 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC11 00 ET T TS - 60.000M - G FREQUENCY TOLERANCE / STABILITY 00=100ppm Max.(Standard), 45=50ppm Max. 25=25ppm Max., 20=20ppm Max. OPERATING TEMP. RANGE Blank=0C to 70C (Standard), ET=-40C to 85C DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) FREQUENCY K=kHz, M=MHz OUTPUT CONTROL FUNCTION Blank=None (No Connection on Pin 1) TS=Tri-State Enable High NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EC11 TS Output Control Function Blank = None (No Connection on Pin 1) TS = Tri-State Enable High Series Designator Line 3: XX.XXX M M=MHz, K=kHz Frequency (5 Digits Maximum + Decimal) Pin 1: No Connect or Tri-State Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 Characteristic Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC11 14 pin DIP 5.0V OS04 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EC11 Series * RoHS Compliant (Pb-free) * HCMOS/TTL output * 5.0V supply voltage * 8 pin DIP package * Stability to 20ppm * Custom lead length, gull wing options available EC11 H 5.6 L 13.2 W 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current 250.000kHz to 24.000MHz 24.001MHz to 50.000MHz 50.001MHz to 66.667MHz 66.668MHz to 106.250MHz Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Inclusive of Operating Temperature Range, Supply Voltage, and Load w/TTL Load w/HCMOS Load w/TTL Load w/HCMOS Load 0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of Waveform w/HCMOS Load at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load at 1.4VDC w/TTL Load or w/HCMOS Load < 70.000MHz at 50% of Waveform w/TTL Load or w/HCMOS Load > 70.000MHz Load Drive Capability 250.000kHz to 24.000MHz 24.001MHz to 70.000MHz 70.001MHz to 106.250MHz Tri-State Input Voltage VIH :No Connection VIH :2.2VDC VIL :0.8VDC Aging (at 25C) Start Up Time Period Jitter: Absolute Period Jitter: One Sigma 50 10(%) (Standard) 50 5(%) (Optional) 50 5(%) (Optional) 10TTL Load or 50pF HCMOS Load 10TTL Load or 15pF HCMOS Load 10LSTTL Load or 15pF HCMOS Load Enables Output Enables Output Disables Output: High Impedance 5ppm / year Maximum 10mSeconds Maximum 100pSeconds Maximum 25pSeconds Maximum 0.250MHz to 106.250MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 10% 45mA Maximum 55mA Maximum 65mA Maximum 85mA Maximum 100ppm, 50ppm, 25ppm, or 20ppm Max. (0C to 70C Only) 2.4VDC Minimum VDD-0.5VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 6 nSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC11 8 pin DIP 5.0V OS05 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC11 00 HS ET T TS - 60.000M - G TR FREQUENCY TOLERANCE / STABILITY 00=100ppm Max.(Standard), 45=50ppm Max. 25=25ppm Max., 20=20ppm Max. PACKAGE HS=Half Size 8 Pin DIP OPERATING TEMP. RANGE Blank=0C to 70C (Standard), ET=-40C to 85C DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%) OUTPUT CONTROL FUNCTION Blank=None (No Connection on Pin 1), TS=Tri-State Enable High MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS PACKAGING OPTIONS Blank=Bulk (Standard) TR=Tape & Reel (only offered with Half Size G and Half Size G2 Options) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Half Size Gull Wing (See Page 132) G2=Half Size Gull Wing (See Page 132) FREQUENCY K=kHz, M=MHz TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For "G" Option (2) For "G2" Option O Pin 1: No Connect or Tri-State Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EC11 TS Output Control Function Blank = None (No Connection on Pin 1) TS = Tri-State Enable High Series Designator 700 Pieces Per Reel Compliant to EIA-481A Line 3: XX.XXX M M=MHz, K=kHz Frequency (5 Digits Maximum + Decimal) ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents PACKAGE Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 VOLTAGE CLASS REV.DATE MANUFACTURER CATEGORY SERIES ECLIPTEK CORP. OSCILLATOR EC11 8 pin DIP 5.0V OS05 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EC1100ETT-60000M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |